EPDM Rubber – A Perfect Roofing Option for Low Slope Roofs

EPDM rubber in roofing systems has been a popular selection of flat-roof material for more than 40 years and is possibly the most widely used roofing alternative for low-slope applications on residential and commercial buildings. It’s a rather simplistic yet durable roofing system – a single ply-rubber sheet that readily sticks with glue.

Castle, Roof, Fortress, Lake, Village

EPDM in plastic roof

A modern EPDM roof is available in rolls with a factory-applied adhesive on either side. The mill applied tape is put into the primed overlap and then wrapped with a bit of pressure roofing company. The resulting seam is robust, perfectly straight, and improbable to fail. Even though this kind of sealant was applied indoors originally, it’s become quite normal for outdoor use as well.

When compared to other flat-roofing substances, EPDM is not only more flexible, but it reveals an extremely high resistance against the elements as well as physical strain.

Due to many positive aspects, EPDM rubber in the roof might easily be regarded as a perfect solution for RVs, homes, industrial buildings, and much more. Typically, EPDM roof membranes are available in black or white, although additional colors like tan can be obtained from a few producers.

Understanding EPDM rubber

Every time the temperature rises or drops down, the plastic roof moves a bit. However, with regards to EPDM Liquid rubber, this will not be an issue. The material is made in such a way that it can quickly stretch out even up to 3 times its standard length, making it the ideal solution for just about any building.

While it is flexible enough to install around pipes, gutter, and skylights, it will not crack from acute dryness and moisture. EPDM enables vapors and heat to escape from the building without letting heat, water, or some other components inside.

Benefits of EPDM Rubber at Roofing

• EPDM rubber membranes are completely flexible and have a life span of minimal 50 Decades
• EPDM roofs are really resistant to Ultra violet and infrared light, with no need for additional surface space protection.
• EPDM roofs offer outstanding resistance to the negative effects of weather, compounds and intense industrial pollutants.
• EPDM doesn’t emit any toxic emissions in the event of any fire and the roof membrane is ideal for thermal recycling too.
• EPDM is extremely elastic, with no shrinking or dimensional change over a temperature range between – 70 to + 120 Degree Centigrade.
• EPDM is recognized as a eco friendly solution to conventional methods.

Maintenance

Even though EPDM rubber roofing doesn’t require too much maintenance in any way, there are specific things you might have to take into account when you’ve one particular roof construction. For example, it’s suggested to check on your roof every 3 weeks in addition to clean it, since a great deal of debris gathering on it might potentially cause harm to the roof.

Conclusion

In comparison to getting it re-laid every calendar year, maintaining it once every 3 months is obviously a much better option to look at. An expert roofing installation and maintenance company can get all your EPDM roof jobs done instantly.

Leave a Reply

Your email address will not be published. Required fields are marked *