When installing a PVC fence, there are a few steps you must take. First, you need to mark any underground lines. For this purpose, you can call the local utility company or call 811 in the U.S. and 811 in Canada.
Alternatively, you can check the phone book to see if your region has a specialized service. Next, you should measure the width of the fence material, which should be four to six feet. You should also buy two 12 (30 cm) wooden stakes and four screws for temporary bracing.
If you want to save time and money while installing a fence around your property, then the no-dig method is the way to go. The installation process is simple and can be completed in a few hours. You’ll need some pipe, stakes, posts, and a level or tape measure. You’ll also need to prepare the ground by removing sod and clearing away any obstructions.
You must ensure you line up the posts correctly when installing a pvc fencing brisbane. While it can be challenging to line up the posts exactly, this method removes any guesswork. To ensure the posts are perfectly aligned, stretch a string line from post to post. Make sure it’s taut, and use it as a guide when installing the middle posts.
Using a post pounder
A post-pounder is a tool used to dig a hole in the ground. It is very important to have the proper depth for the post. If the post is not buried deeply, it may lean against the post and cause the fence to collapse, or it may blow over during extreme weather. It is also a good idea to mark underground lines before you dig the hole.
One of the most labor-intensive parts of putting up a fence is installing the posts. It takes at least five to ten minutes to dig each post hole, about five to five minutes to mix and pour concrete, and about five to five minutes to set the post. While you can perform the process by hand, using a post pounder saves you the trouble of mixing concrete and placing the posts. A pneumatic or gas post-pounder can complete the job in a matter of minutes.
Digging into the ground
Before digging, make sure the ground is level and free of any obstacles. Mark any underground lines and prepare the area for digging. Dig post holes that are deeper than the frost line. Then, place the posts. Make sure the posts are centered, and the mortises face each other. Then, backfill the hole. Let the cement set for at least a day.
When you are ready to install your fence, it is important to prepare the area. Be sure to contact your neighbors and check the deed for restrictions. If you are digging for power lines, be sure to mark them first. You should also check for underground utilities. You don’t want to damage them when installing your fence.
Posts flanking gates with extra care
You must take extra care while installing posts flanking gates. Generally, you will need to use heavy-duty aluminum extrusion to support them. Posts flanking gates must also be perfectly plumb. If you don’t want to spend a lot of money, you can use a wood 2×4 stud and wood pickets.
Use a level to check for levelness before you set posts. You may need to adjust the posts once the concrete hardens. Alternatively, you can brace the posts with 2x4s in both directions. The braced posts should be driven into the ground to the proper depth. It is also best to set the corner and end posts first.
Carefully check the dimensions of each panel. You can buy fence panels in different sizes and shapes, but ensure that they are of the same size. Some may also require custom-cut sections to fit.
For example, if your gate is wider than the rest of your fence, you’ll need to cut sections to fit. You can do this with a circular saw. Remember to leave a couple of extra inches on each end, so they don’t warp. If you’re installing a gate, make sure that the posts flanking it are properly spaced.
Choosing the right style
There are many styles of PVC fences available for your home. You can choose from privacy, semi-privacy, picket, security, and pool fence styles. Before you choose a style, make sure to consider your budget. While some styles will cost more than others, they are all durable and low maintenance. Chain link fencing is also very affordable and can be beautified with vines.
Depending on your needs, privacy fencing is a great option for your home. This style features alternating narrow and wide spaces to enhance privacy. It also enhances curb appeal.